Alternate Ftp Printing - Printronix PrintNet P8000 Line User Manual

9. Place the file to be printed within this directory on the PrintNet,
so it can be spooled and printed.
Syntax:
put filename
10. Close the FTP session, unless you have more jobs to print.
Syntax:
quit

Alternate FTP Printing

1. Change the default ftp directory by entering the following
command:
store pserver ftp dest
2. Open an FTP session with the PrintNet.
Syntax:
ftp NICIPaddress
3. Log in as root.
4. At the password prompt, press ENTER (since there is no
default password).
5. Change the mode to correspond with the type of file you are
going to print. By default, ASCII is set for text-only files, but if
you need to print both text and graphics, select binary using the
bin command.
6. Send the file to be printed here.
Syntax:
put filename d1prn
7. Close the FTP session, unless you have more jobs to print.
Syntax:
quit
Alternate FTP Printing
83