Printronix PrintNet P8000 Line User Manual page 111

Workstation Customizing Object
Library
Internet address
Destination options
Print separator page
User defined option
Figure 29. Automatic Remote Output Queue Configuration
3. Enter values for the following parameters:
Output Queue (OUTQ)
The name of the AS/400 output queue. The name can be
anything you would like. This name is not the same as the
printer internal queue name, 'd1prn'.
Remote System (RMTSYS)
Internet address of the PrintNet on the printer (*INTNETADR
prompts you for this) or the hostname of the PrintNet.
Remote Printer Queue (RMTPRTQ)
Default name of the network printer. Set for any of 'd1prn'
through 'd8prn'. The remote printer queue name must be
lowercase, entered in single quotes.
NOTE:When the IPDS feature is installed, queue name
Writer to Autostart (AUTOSRTWTR)
Set the value to 1. This will start the Remote Writer when the
queue is created, and it automatically starts the Remote Writer
after each IPL of the AS/400 and whenever STRTCP is started.
Setting Up Printing for ASCII Files
WSCST
INTNETADR
DESTOPT
SEPPAGE
USRDFNOPT
'd4prn' is not available.
> (See Note on
page 108)
> '9.99.57.173'
*NONE
*YES
*NONE
111