Printronix PrintNet P8000 Line User Manual page 133

Configuring AFP with CRTPSFCFG on V4R3 and Above (Optional)
Edge orient ...............................
Use outline fonts.......................
PSF defined option...................
Font substitution messages......
Capture host fonts at printer.....
Font resolution for formatting ...
Font mapping table...................
Library..................................
Cut sheet emulation mode ........
Use DBCS simulation fonts
Replace .....................................
Authority ....................................
Figure 35. Example CRTPSFCFG Command (V4R2 and above)
3. The following parameters are recommended: PSF
configuration (PSFCFG)
The name used for this PSF configuration object. The name must
match the user-defined object name (USRDFNOBJ) in the printer
DEVD.
PSF configuration (PSFCFG)
The name used for this PSF configuration object. The name must
match the user-defined object name (USRDFNOBJ) in the printer
DEVD.
IPDS pass through (IPDSPASTHR)
To print SCS files, specify *YES, PSF transforms SCS into IPDS
before printing.
*NO *YES, *NO
*NO *YES, *NO
*NONE
+ for more values
*YES *YES, *NO
*NO *NO, *YES
*SEARCH *SEARCH, 240, 300
*NONE Name, *NONE
Name
*NONE *NONE, *CHKFIRST, *CHKALL
*NO *YES, *NO
*YES *YES, *NO
*LIBCRTAUT Name, *LIBCRTAUT,
*CHANGE...
133