Printing An Ethernet Test Page; Printnet Verification - Printronix PrintNet P8000 Line User Manual

Chapter 2
Configuration Tools
NOTE: Some network environments do not require any network
The following methods are available for configuring the Ethernet:
•
via the control panel
•
HTML forms
•
Telnet
•
PTX_SETUP

Printing an Ethernet Test Page

Always print an Ethernet Test page before performing any updates
or network configuration. Refer to the User's Manual for instructions
on printing a test page.

PrintNet Verification

Before performing the verification, you must connect PrintNet to the
local area network.
1. Print an Ethernet Test page to verify the settings you selected.
2. Verify the network setting is correct.
26
settings to be configured on the PrintNet. However, all
network setups require configuration on the host end.