Configuring Afp With Crtpsfcfg On V4R3 And Above (Optional) - Printronix PrintNet P8000 Line User Manual

Chapter 8
Configuring on AS/400 as an IPDS Printer
Configuring AFP with CRTPSFCFG on V4R3
and Above (Optional)
To configure the iSeries for IPDS printing on V4R3:
1. At the iSeries command line, enter a command in the form:
CRTPSFCFG PSFCFG(AFP/NETPRTP7000) IPDSPASTHR(*YES)
RLSTMR(*SEC15) TEXT('PRINTRONIX P7000 NETWORK ATTACHED
PRINTER') PAGSIZCTL(*YES) ACTRLSTMR(*NORDYF)
2. A completed screen looks like Figure 35.
Create PSF Configuration (CRTPSFCFG)
PSF configuration ....................
Library .................................
User resource library list ............
Device resource library list .........
+ for more values
IPDS pass through ...................
Activate release timer.................
Release timer ............................
Restart timer...............................
APPC and TCP/IP retry count ....
Delay between APPC retries......
Acknowledgment frequency .......
Printer response timer
Generate PDF output
Text 'description' ......................
Automatic session recovery:
Enabled ................................
Message option ....................
Blank page .................................
Page size control.....................
Resident fonts ...........................
Resource retention ....................
132
Name
>*CURLIB Name, *CURLIB
*JOBLIBL *JOBLIBL, *CURLIB, *NONE
*DFT Name, *DFT
>*NO *NO, *YES
*NORDYF *NORDYF, *IMMED...
>*NOMAX 1-1440, *NOMAX, *SEC15...
*IMMED 1-1440, *IMMED
15 1-99, *NOMAX
90 0-999
100 1-32767
*NOMAX 5-3600, *NOMAX
*NONE *NONE, SPLF, *STMF, *MAIL
>*BLANK
Additional Parameters
*NO *NO, *YES
*INFO, *INQ
*YES *YES, *NO
>*YES *NO, *YES
*YES *YES, *NO
*YES *YES, *NO