Function Test - Bosch Diniop IP - NWC-0455 Installation Manual

Dinion IP
| Installation Manual
– Click Download; a dialog box appears.
– Follow the instructions to save the current settings.
Configuration upload
– Enter the full path of the file to upload or click Browse... to select the desired
file.
– Make certain that the file to be loaded comes from the same device type as
the unit you want to reconfigure.
– Click Upload to begin transmission to the unit. The progress bar allows you to
monitor the transfer.
Once the upload is complete, the new configuration is activated. The time
remaining is shown by the message going to reset Reconnecting in ... seconds.
After the upload is completed successfully, the unit will restart automatically.

Function test

The camera offers a variety of configuration options. Therefore you should check
that it works properly after installation and configuration. This is the only way to
ensure that the camera will function as intended in the event of an alarm.
Your check should include the following functions:
• Can the camera be called remotely?
• Does the camera transmit all the data required?
• Does the camera respond as desired to alarm events?
• Is it possible to control peripheral devices if necessary?
Bosch Security Systems | 2006-05 | V2.0
EN | 81