c. Close the retention clips on both ends (see letter "C" in
8. Connect the fan cables to the corresponding connectors on the backplane (see letter
"A" in
9. Connect the USB and data cables from the control panel to the USB connector and
front panel connector on the backplane (see letter "B" in
10. Connect the power cable to the power connector on the backplane (see letter "C" in
Figure
11. Passive backplane only: Do the following:
80
A
Figure 70. Installing the Bridge Board
Figure
71).
71).
Figure
B
A
AF002897
Figure
®
Intel
Server System SR1600UR Service Guide
70).
71).