Intel SR1600UR Service Manual page 25

Peripheral Interfaces
Video
LAN
Expansion Capabilities
Hard Drive Options
Peripherals
Control Panel
®
Intel Server System SR1600UR Service Guide
®
Table 2. Intel Server System SR1600UR Feature Summary
Feature
External connections:
•
DB-15 video connector (back)
•
Hot-swap hard drive system only: DB-15 video connector
(front)
•
RJ-45 serial Port A connector
•
Two RJ-45 10/100/1000 Mb network connections
•
Four USB 2.0 connectors (back)
•
One USB 2.0 connector (front)
Internal connections:
•
One USB 2x5 pin header, which supports two USB 2.0 ports
•
One low-profile USB 2x5 pin header to support low-profile USB
Solid State drives
•
One DH-10 Serial Port B header
•
Six Serial ATA (SATA) II connectors
•
Two I/O module connectors
•
One RMM3 connector to support an optional Intel
Management Module 3
•
SATA Software RAID 5 Activation Key connector
•
One SSI-EEB compliant front panel header
•
One SSI-EEB compliant 24-pin main power connector
•
One SSI-compliant 8-pin CPU power connector
•
One SSI-compliant auxiliary power connector
On-board ServerEngines* LLC Pilot II Controller
•
Integrated 2D Video Controller
•
32 MB DDR2 Memory
Two 10/100/1000 Intel
One x16 PCI Express* Gen 2 PCI riser slot capable of supporting a
full-length full-height PCI Express* add-in card
•
Fixed mount hard drive system:
–
•
Hot-swap hard drive system:
–
•
Intel
levels 0/1/10
•
Optional support for SW RAID 5 with activation key
•
Slimline bay for slimline SATA optical drive
•
One PCI Express* X16 Add-in Card slot (Gen 2)
•
Standard control panel
•
Hot-swap hard drive system only: Intel
Description
®
82575 PHYs
Three SATA drives
Three 3.5 inch hot-swap SATA/SAS drives
®
Embedded Server RAID Technology II with SW RAID
®
Remote
®
Local Control Panel
7