12. Close the CPU load plate all the way (see letter "A" in
13. Close the socket lever completely and ensure that the load plate tab engages under
the socket lever when fully closed (see letter "B" in
14. Install the heatsink. For instructions, see
Installing the Heatsink
You must install the processor before installing the heatsink. For instructions, see
"Installing the Processor" on page
Caution: Improper installation can damage the heatsink. Pay close attention to the steps and
perform each step exactly as indicated to avoid damage.
Caution: The heatsink has Thermal Interface Material (TIM) located on the bottom of it. Use
caution when you unpack the heatsink so you do not damage the TIM.
Note: New unused heatsinks have adequate TIM on the bottom. If you are reusing a heatsink
from replacing a processor, make sure there is adequate TIM present on the heatsink to
support processor cooling.
®
Intel
Server System SR1600UR Service Guide
Orientation Notch
Orientation Post
Figure 39. Installing the Processor
A
Figure 40. Closing the Load Plate
"Installing the Heatsink" on page
50.
A
AF002839
Figure
40).
Figure
40).
B
AF002840
53.
53