Installing The System Cover; Figure 24. Removing The Server System Cover - Intel SR1600UR Service Manual

Installing the System Cover

To install the server system cover, follow these steps:
1. Place the cover over the server system so that the side edges of the cover sit just
inside the server system sidewalls.
2. Slide the cover forward until it clicks into place (see letter "A" in
3. (Optional) Insert the safety screw at the center of the top cover (see letter "B" in
Figure
®
Intel Server System SR1600UR Service Guide
D
B

Figure 24. Removing the Server System Cover

25) if required.
C
A
AF002939
Figure 25).
39