Removing The Front Bezel; Removing And Installing The System Cover; Removing The System Cover; Figure 23. Removing The Front Bezel - Intel SR1600UR Service Manual

Removing the Front Bezel

To remove the front bezel, follow these steps:
1. Unlock the bezel.
2. Pull the bezel from the server system.

Removing and Installing the System Cover

Removing the System Cover

The server system must be operated with the system cover in place to ensure proper
cooling. You will need to remove the top cover to add or replace components inside of the
server. Before removing the system cover, power down the server and unplug all
peripheral devices and the AC power cable(s).
Note: A nonskid surface or a stop behind the server system may be needed to prevent the server
system from sliding on your work surface.
To remove the server system cover, follow these steps:
1. Remove the safety screw if it is installed (see letter "A" in
2. While holding in the blue button at the top of the server system in (see letter "B" in
Figure
3. Insert your finger in the notch (see letter "D" in
upward to remove it.
38

Figure 23. Removing the Front Bezel

24), slide the top cover back until it stops (see letter "C" in
Figure
Figure 24) and lift the cover
®
Intel Server System SR1600UR Service Guide
AF002880
24).
Figure 24).