Figure 75. Installing The Server Board - Intel SR1600UR Service Manual

3. Connect all the power cables coming from the power supply to the server board.
4. Install memory. For instructions, see
5. Install processor(s). For instructions, see
6. Install processor heatsink(s). For instructions, see
page
7. Install the system fan assembly. For instructions, see
Assembly" on page
8. Hot-swap hard drive systems only: Install the bridge board. For instructions, see
step 7 in
9. Hot-swap hard drive systems with passive backplane only: Connect the hard
drive SATA cables from the backplane to the server board.
10. Install the blue air baffle. For instructions, see
page
11. If necessary, install the I/O expansion module. For instructions, see
I/O Expansion Module" on page
86

Figure 75. Installing the Server Board

53.
92.
"Installing the Backplane Board" on page
57.
B
A
"Installing DIMMs" on page
"Installing the Processor" on page 50
"Installing the Heatsink" on
78.
"Installing the Small Air Baffle" on
69.
®
Intel Server System SR1600UR Service Guide
AF002914
48.
"Installing the System Fan
"Installing the