Removing and Installing the Fan Assembly
Removing the System Fan Assembly
To remove the system fan assembly, follow these steps:
1. If installed, remove the PCI riser assembly. For instructions, see
PCI Riser Assembly" on page
2. If installed, remove the processor air duct. For instructions, see
Processor Air Duct" on page
3. Remove the small air baffle. For instructions, see
on page
4. Remove the bridge board. For instructions, see step 4 in
Board" on page 82
5. Disconnect the fan power cables from the backplane board (see letter "A" in
Figure
6. Press latch (see letter "B" in
"C" in
®
Intel
Server System SR1600UR Service Guide
46.
57.
81).
Figure
Figure
81).
41.
"Removing the Small Air Baffle"
81) and slide fan assembly to the left (see letter
"Removing the
"Removing the
"Removing the Backplane
91