Installing And Removing The Bridge Board; Removing The Bridge Board; Installing The Bridge Board; Figure 58. Installing The Intel Storage Upgrade Key - Intel H2000WP Series Service Manual

Installing and Removing the Bridge Board

Removing the Bridge Board

1. Release the fixing screws (letter A) on the bridge board.
2. Straightly lift up bridge board to remove from the server board.

Installing the Bridge Board

1. Attach the plastic holder to the front end of bridge board (letter A).
2. Plug the rear end of bridge board to the slot on base board (letter B).
3. Secure the bridge board with screws (see letter C) to the tray side wall.
®
Intel Server System H2000WP Family Service Guide
Figure 58. Installing the Intel

Figure 59. Removing the bridge board

Hardware Installations and Updates
®
Storage Upgrade Key
35