Rmm3; Figure 65. Removing The Intel ® Rmm3 From The Server System; Removing The Intel - Intel SR1600UR Service Manual

Removing the Intel

To remove Intel
1. Remove the PCI riser assembly. For instructions, see
Assembly" on page
2. Remove the processor air duct. For instructions, see
Duct" on page
3. Remove screws from the back of the chassis (see letter "A" in
4. Disconnect the Intel
in
Figure
74
®

RMM3

®
Remote Management Module 3, follow these steps:
41.
46.
®
RMM3 from the connector on the server board (see letter "B"
Figure 65) and remove the module out of the server system (see letter "C" in
65).
Figure 65. Removing the Intel
"Removing the PCI Riser
"Removing the Processor Air
C
B
®
RMM3 from the Server System
®
Intel Server System SR1600UR Service Guide
Figure 65)
A
AF002858