Removing The Processor; Figure 42. Removing The Heatsink - Intel SR1600UR Service Manual

Removing the Processor

To remove the processor, follow these steps:
1. Remove the PCI riser assembly. For instructions, see
Assembly" on page
2. Remove the processor air duct. For instructions, see
Duct" on page
3. Remove the heatsink. For instructions, see
4. Unplug the processor fan cable from the server board.
5. Open the processor socket lever (see
6. Open the CPU load plate (see
7. Remove the processor.
8. If installing a replacement processor, see
instructions. Otherwise, install the protective socket cover over the empty processor
socket.
56
B
3
A
2
4
TIM

Figure 42. Removing the Heatsink

41.
46.
Figure
1
C
"Removing the PCI Riser
"Removing the Processor Air
"Removing the Heatsink" on page
Figure 35).
36).
"Installing the Processor" on page 50
®
Intel Server System SR1600UR Service Guide
55.
for