Table of Contents
Advertisement
Mitel IP Phone User Reference Guide
2. While it is ringing, repeatedly press the Volume keys until the ring volume is at the level
you want.
Change handset volume on the Telematrix 3000
To change the volume of the sound you hear through the handset, follow these steps:
1. Lift the handset.
2. Repeatedly press the Volume keys until the volume is at the level you want.
3. Replace the handset.
Change speaker volume on the Telematrix 3000
To change the volume of the sound you hear through the speaker, follow these steps:
1. Press the Speaker button.
2. Repeatedly press the Volume keys until the volume is at the level you want.
Using a headset
The Mitel 5020/5220 and 5224 IP phones support the use of specially designed headsets made
by Plantronics. The following headset types are available:
•
Monaural over-the ear
•
Binaural over-the head with voice tube
•
Binaural over the head with noise canceling microphone
Some headsets are all supplied with a control switch that can be used to mute the microphone.
Connect and configure the headset
To connect the headset to the Mitel 5224 or 5020/5220 IP phone, follow these steps:
1. Plug the headset into the headset jack on the back of the 5224/5220 set.
2. Remove the handset from the cradle. You can hook it over the top of the set cradle.
3. Press the DIR softkey, then the QUIT softkey to take the phone to an on-hook (or idle) state.
Answer a Call
To answer a call while using the headset, press the Line Appearance key or the ANSWER
softkey.
End a Call
To end a call while using the headset, press the END softkey.
84
Advertisement
Table of Contents
