Using Features Via The 5212 Ip Phone - Mitel 3600 User Reference Manual

Mitel IP Phone User Reference Guide
2. To make an internal call, dial the extension. To make an external call, dial the prefix required
for external dialing (usually 9) followed by the number you want to call.
320
3. When you finish dialing the number, the call is placed.
Calling: Robin Jones
4. If you place an internal call, the LCD displays the extension and name of the connected
party once the call is answered. If you place an external call, the LCD screen displays the
name of the connected party, or if the name is unknown, just the phone number.
320: Robin Jones
5. To switch between two active calls, press the flashing Line Appearance key. This puts the
active call on hold and activates the other call.
Ending one call keeps the second call on hold. To reconnect to the second call, press the
flashing Line Appearance key.

Using features via the 5212 IP phone

This section explains the features available from your 5212 IP phone. Some of these features
must be pre-programmed in order to be available. To learn how to program features to keys,
see "Program memory keys" on page 93.
3-way call on the 5212 IP phone
Using 3-Way Call, you can set up a phone call among three separate parties.
To activate 3-Way Call, follow these steps:
1. While on an active call, press the
selects an available Line Appearance. The LCD screen displays:
Conf with:
2. Enter the phone number of the third party.
The system dials the number and displays a "Calling" message along with the caller ID on
the first line of the LCD screen.
Calling: Lesley Greene
56
key twice. This places the first call on hold, and