Table of Contents
Advertisement
Mitel IP Phone User Reference Guide
If you are on-hook, the next available Line Appearance is selected and the speakerphone is
activated. The system will attempt to dial the displayed number by prefixing it with the
appropriate digits for external dialing (usually "9" or "91" depending on configuration). If the
number can be dialed as such, you will hear ringing once the call has been placed. If the number
cannot be dialed as such, the call will fail and you will have to dial the number manually
remembering to include the proper prefix digits.
Note: The position of the call in the call list is displayed in front of the phone number.
The * symbol beside the position of the call means that the call was not answered.
Redial on the 5212 IP phone
Using the
in that list without using the keypad. The maximum amount of numbers in your redial list is
typically ten but is dependent on your service provider.
To use Redial, follow these steps:
1. Press the
The number that you most recently dialed is displayed:
*1: 9-605-223-7865
2. Use the Arrow keys to navigate the list (if required).
3. Once the required number is displayed, press the
available Line Appearance is selected and you will hear ringing once the number has been
dialed.
Note: * means that the call was not answered. The position of the call in the call list is
displayed in front of the phone number. Press the
Company speed dial on the 5212 IP phone
Using Company Speed Dial, you can call a number from the External Directory by pressing a
single memory key on your phone. To use this feature, you must have a phone key programmed
with Company Speed Dial.
To make a call using the company speed dial, choose one of the following:
•
Press the Company Speed Dial key for the number you want to call. The system will select
the next available Line Appearance for you and activate the speakerphone.
•
Activate the speakerphone and press the Company Speed Dial key.
•
Select an available Line Appearance. This will activate the speakerphone. Press the Com-
pany Speed Dial key
•
Lift the handset and press the Company Speed Dial key for the number you want to call.
60
key, you can view a list of calls that were made and also redial a number
key.
key to make the call. The next
key to exit from the call list.
Advertisement
Table of Contents
