Table of Contents
Advertisement
Mitel IP Phone User Reference Guide
3. To end a call while using the speakerphone, press the speaker key on the Telematrix 3000
phone.
Switch from speakerphone to handset on the Telematrix 3000
•
To switch from the speakerphone to the handset during a call, pick up the handset.
•
To end the call while using the handset, replace the handset.
Answering a second call on the Telematrix 3000
A second incoming call causes the phone to ring once, and a line appearance key to flash.
To answer a second call, choose one of the following:
•
Press the flashing Line Appearance key. This puts the active call on hold and answers the
second call.
•
End the first call by replacing the handset. The phone will start ringing. Pick up the handset
again to answer the second call.
•
To switch between two active calls, press the flashing Line Appearance key. This puts the
active call on hold and activates the other call.
Making a call on the Telematrix 3000
To make a call, follow these steps:
1. Lift the handset. This will select the next available Line Appearance.
You can also start dialing the number without lifting the handset. This will automatically
select the next available Line Appearance and operate in speakerphone mode.
2. To make an internal call, dial the extension. To make an external call, dial the prefix required
for external dialing (usually 9) followed by the number you want to call.
When you finish dialing the number, the call is placed.
3. To end the call, replace the handset.
Note: To use the speakerphone for step 1, press an available Line Appearance key or
the Speaker key instead of lifting the handset.
To end the call before you have completed dialing, choose one of the following:
Replace the handset if using the handset.
Select the Speaker key if using the speakerphone.
Making a second call on the Telematrix 3000
To make a second call while on an active call, follow these steps:
1. Press any available Line Appearance key. This puts the active call on hold, and provides
dial tone for a second call.
2. To make an internal call, dial the extension. To make an external call, dial the prefix required
for external dialing (usually 9) followed by the number you want to call.
When you finish dialing the number the call is placed.
74
Advertisement
Table of Contents
