Table of Contents
Advertisement
Using a Headset
The 6730i accepts headsets through the modular RJ9 handset jack on the back of the phone. Contact your telephone
equipment retailer or distributor to purchase a compatible headset.
Note:
Customers should read and observe all safety recommendations contained in headset operating guides when using
any headset
Advanced Volume Controls for the Headset Mic
On the 6730i, there are 3 options for the headset microphone volume. For more information about the headset micro-
phone, see
"Headset Mic Volume"
IP Phone UI
To change the volume:
1.
Press
to enter the Options list.
Select Preferences and press 4.
2.
Use 2 to scroll down to Set Audio and press 4 to select.
3.
Press 2 to scroll down to Headset/Mic Volume and press 4 to select.
4.
Use 2 to scroll down the list and press 4 to select your desired volume.
5.
Press 4 to save changes and 3 to exit.
6.
If you do not wish to save changes, press 3 to return to the previous screen.
7.
Note:
By default, the volume for the headset microphone is set to medium.
Making and Receiving Calls Using a Headset
IP Phone UI
1.
Ensure that you have selected a headset audio mode by accessing the Options list (under option Preferences->Set
Audio->Audio Mode on the IP Phone).
2.
Plug the headset into the jack.
3.
Press the
key to obtain a dial tone or to answer an incoming call. Depending on the audio mode selected
from the options menu, a dial tone or an incoming call is received on either the headset or the handsfree speaker-
phone.
4.
Press the
key to end the call.
41-001376-05 REV03 – 07.2014
on
page
24.
Making Calls
93
Advertisement
Table of Contents
