Answering A Call On The 5212 Ip Phone - Mitel 3600 User Reference Manual

Activating a Mitel 5212 IP phone
To activate a 5212 phone you must physically connect the phone, then log in with your extension
and PIN number.
To activate your phone, follow these steps:
1. Unplug your computer from the network.
2. Plug the phone into the network (through the supplied power pack or from power over the
Ethernet; consult the documentation provided in the box).
3. Plug the computer into the phone.
4. Plug the phone power pack into an outlet.
5. Wait for the phone to display the following (this may take 30 seconds or more):
LOGGED OUT
*00 to Login
6. Enter *00. The phone will display the following:
Extension:
7. Enter your extension. The phone will display the following:
PIN:
Enter pin press #
8. Enter your PIN, then the # key. The phone will display the following:
Extension: 314
You have now successfully activated the phone, and can make calls.

Answering a call on the 5212 IP phone

When an incoming call is received on a phone, several things happen: (1) the phone rings, (2)
a Line Appearance flashes, and (3) the LCD displays the phone number of the caller and, if
know, the name of the caller.
321: Robin Jones
You can answer an incoming call by using the handset or the speakerphone.
You can pull back a call that has been answered by a twinned target phone by pressing the
corresponding Line Appearance key. See "Twinned Calls on the 5212 IP phone" on page 70.
Using the phone system
53