Table of Contents
Advertisement
Mitel IP Phone User Reference Guide
Notes:
You can re-enter an account code for a call multiple times. The last account code entered
is the account code that will be assigned to the call.
To cancel account code entry before the call is placed, replace the handset (or, if using
the speakerphone, press the
be cancelled.
If the pre-programmed account code has an invalid length, the phone LCD briefly displays
"Invalid Account Code". Contact your system administrator to determine the valid account
code length for your business.
You cannot assign an account code to a call once it has been completed.
Call Lists on the 5340 phone
Call list on the 5340 phone
Call list keeps a list of the calls that you make and receive. The call list is accessible from your
phone. You can redial any calls that you made from the call list. See "Redial on the 5340 phone"
on page 13. You may be able to dial a number from your incoming call list if it is supported by
your service provider.
To view the list of incoming calls received, follow these steps:
1. Press the CALLS softkey on your phone. If you have programmed one of your program-
mable keys as Incoming Calls List, you can press this key instead.
The caller's name of the most recent call that you received is displayed. If the name of the
caller is not known, the number will be displayed.
2. Use the
3. Press the TIME softkey if you wish to display the time and date of the call.
4. Press the NUMBER softkey if you wish to display the number of the caller.
5. Press the NAME softkey if you wish to display the name of the caller again. If the name is
not known, this option is not available.
6. Press the QUIT softkey to exit from the call list.
To call a number from your incoming calls list (only available if dialing from the incoming call
list is supported by your Service Provider):
1. Press the CALLS softkey on your phone (or the Incoming Calls List programmed key). The
caller's name of the most recent call that you received is displayed.
2. Use the
3. Press the DIAL softkey to make a call to the displayed number.
The next available Line Appearance is selected and the system will attempt to dial the
displayed number by prefixing it with the appropriate digits for external dialing (usually "9"
or "91" depending on configuration). If the number can be dialed as such, you will hear
ringing once the call has been placed. If the number cannot be dialed as such, the call will
fail and you will have to dial the number manually remembering to include the proper prefix
digits.
12
key). Account code speed entry during a call cannot
keys to navigate the list.
keys to navigate the list.
Advertisement
Table of Contents
