Using The Lcd Touch Screen; Figure 6-3. Parts Of The Lcd - Eaton 93PM Installation And Operation Manual

UPS Operating Instructions
6.2.3

Using the LCD Touch Screen

The LCD touch screen on the control panel provides an operator interface with the UPS system. Figure 6-3
identifies the display areas discussed in the following sections.
All functions and commands are accessed by touching or tapping the screen tabs or buttons. When text input
is required, either a Qwerty keyboard or numeric keypad will be displayed.
A
B
C
D

Figure 6-3. Parts of the LCD

A Status Bar displays the UPS name, UPS state, current date and time, meter information, active alarms
and notices, and a sign in/sign out button. For more information about alarms and notices, see paragraph
6.2.2.
B Main Menu Navigation Bar displays main menu functions and selections as tab buttons. To select a
screen function touch the tab name.
C Secondary Menu Navigation Bar displays functions and selections related to the current screen as tab
buttons. To select a screen function touch the tab name.
D Information Area contains status data, operational controls, acknowledgments, action confirmations, and
screen prompts.
You can use the LCD touch screen to:
Look at a log of UPS events (alarms, notices, and commands) (see paragraph 6.2.6)
l
Monitor UPS operation (see paragraph 6.2.6)
l
Set UPS parameters (see paragraph 6.2.6)
l
Control UPS operation (see paragraphs 6.2.6 and 6.2.8)
l
6-4 Eaton 93PM UPS (60–100 kW, 480V) Installation and Operation Manual P-164000227—Rev 2 www.eaton.com/powerquality