11 User Instructions; Start-Up; Accessing The User Level Menus; Heating Circuit Configuration - REMEHA Gas 320 Ace Installation And User Manual

11 User instructions

Fig.100 Error details
........ .......
22/02/2018 11:20 ...... .....
Error Code: A.00.00
20/02/2018 16:51
.......... ......... .... ............ ........... ... ..... ....
...... ..... ......... ... ....... .......
..... .. .......: ..... .........
..... ... .......: ..... ........
....... .... .......:
....... ...... .....:
11 User instructions
11.1

Start-up

11.2

Accessing the user level menus

Fig.101 Menu selection
22/02/2018 11:20 Home Screen
Not set
... ...
........ .......
......
Fig.102 Confirm menu selection
22/02/2018 11:20 Home Screen
Not set
... ...
........ .......
......
11.3

Heating circuit configuration

Tab.74 Menu to configure domestic hot water
Menu
Set heating temperatures
Operating mode
78
....... ...
.......
AD-3001381-01
........ .......
AD-3001387-01
........ .......
AD-3001388-01
Function
Set the temperatures for the timer program.
Set the operating mode.
3. Select the error code you want to investigate.
The display shows an explanation of the error code and several
details of the appliance when the error occurred.
4. To clear the error memory, press and hold the
Start up the boiler as follows:
1. Open the boiler gas tap.
2. Insert the boiler plug into an earthed socket.
3. Check the water pressure of the system. If necessary, top up the
system.
The current operating condition of the boiler is shown on the display.
The tiles on the home screen provide quick access for the user to the
corresponding menus.
1. Use the rotary knob to select the required menu.
2. Press the button to confirm the selection.
The available settings of this selected menu appear in the display.
3. Use the rotary knob to select the desired setting.
4. Press the button to confirm the selection.
All options for change will appear in the display (if a setting cannot
be changed, Cannot edit read-only datapoint will appear in the
display).
5. Use the rotary knob to change the setting.
6. Press the button to confirm the selection.
7. Use the rotary knob to select the next setting or press the
return to the home screen.
For every heating circuit there is a quick user settings menu available.
Select the heating circuit you want to configure by selecting the tile [
[ ], [ ], [ ], [ ], [ ] or [
button.
]
7734324 - v.07 - 21092022
button to
],