Settings; Changing The Parameters; Changing The User-Level Parameters - REMEHA Gas 210 ECO PRO Installation, User And Service Manual

6 Settings

6 Settings
6.1

Changing the parameters

6.2

Changing the user-level parameters

Fig.3 Access to the user-level parameters
2x
2x
10
The boiler's control unit is set for the most common central heating sys­
tems. These settings will ensure that virtually every central heating system
operates effectively. The user or the installer can optimise the parameters
as required.
For operation in open vented systems, the
justed.
Caution
Modification of the factory settings may impair boiler operation.
The parameters at user level (
required.
1. Navigate to the user menu.
The
2. Select the user menu using the
:
3. Press the
:
4. Press the
(min.) appears and flashes (factory setting).
5. Change the value by pressing the
6. Confirm the value with the
:
7. Press the
AD-4000051-01
to
symbol flashes in the menu bar.
appears with flashing .
key.
appears with flashing .
key.
key.
appears with flashing .
key twice to go back to the main display.
parameter must be ad­
) can be changed by the user as
key.
or key.
7698035 - v.01 - 19022018