Specific Maintenance Operations; Inspection Of The Ignition Electrode - REMEHA Quinta Pro 30 Installation And Service Manual

7. Checking and maintenance
7.4

Specific maintenance operations

3
2
1
70
If the standard inspection and maintenance operations have revealed
the necessity to carry out additional maintenance work, proceed as
follows, depending on the nature of the work:
7.4.1.
1. Remove the ignition electrode plug from the ignition transformer.
4
2. Unscrew the 2 screws. Remove the unit.
3. Wipe off all traces of deposits using an abrasive cloth.
4. Check the ignition electrode for wear. Replace if necessary.
5. Check the gasket.
6. Refit all parts, replacing those that are damaged.
T002872-A

Inspection of the ignition electrode

The ignition cable is fixed to the ignition electrode and
therefore may not be removed.
Quinta Pro 30 - 45 - 65 - 90 - 115
09/06/2011 - 123157-AF