System In Cascade; Calorifier Connection; Water Flow Rate; Technical Specifications - REMEHA Quinta Pro 30 Installation And Service Manual

3. Technical description
3.4

Technical specifications

Boiler type
General
EC indentification no.
Gas Council number
Flow rate setting
(1) Front panel removed
12
3.3.2.
The boiler is ideally suited for a cascade system. There are a number
of standard solutions available. For example:
4 Cascade sets (quick assembly) for the installation of 2 to 6 boilers
next to each other or 3 to 6 boilers mounted back to back on a free-
standing frame. When the boilers are mounted next to each other,
they can be mounted either on the wall or on a free-standing frame.
4 Low loss headers for a cascade system of 2 or 3 boilers (Quinta
Pro 45 and/or Quinta Pro 65). The flow and return of each boiler
can be directly connected to these.
3.3.3.
A calorifier can be connected to the boiler. Our product range includes
various calorifiers.
The calorifier can be connected to the boiler in two ways:
4 Using a three-way valve.
4 Using a calorifier pump.
3.3.4.
The boiler's modulating control system limits the maximum difference
in temperature between the heating flow and return and the maximum
speed at which the flow temperature increases. For this reason the
boiler is, so to speak, insensitive to a flow which is too low.
In all cases, maintain a minimum water flow of 0.4 m
Quinta Pro
PIN
Adjustable
CAUTION
The pump may have a maximum input of 200 W. Use an
auxiliary relay for a pump with a larger input.

System in cascade

Please contact us for further information.

Calorifier connection

Please contact us for further information.

Water flow rate

30 45
41-288-15 41-288-16 41-288-17
Modulating, Start/Stop, 0 - 10 V
Quinta Pro 30 - 45 - 65 - 90 - 115
3
/h.
65 90 115
0063CL3333
09/06/2011 - 123157-AF