Commissioning; Control Panel; Functions Of The Keys; Meaning Of The Symbols On The Display - REMEHA Quinta Pro 30 Installation And Service Manual

5. Commissioning

5 Commissioning
5.1

Control panel

2 3 4
6
Information menu:
Q Reading the various current values.
Chimney-sweeping position:
B
Forced full or part load for CO
User menu:
W
Parameters at user level can be changed.
Heating programme deactivated:
C
The heating function is deactivated.
Manual mode:
E
Boiler is set to manual operation.
DHW programme deactivated:
T
The DHW mode is deactivated.
Service menu:
?
Parameters at installer level can be changed.
Energy-saving mode:
)
Economic mode activated.
46
1
5 8
7
T001996-A
measurement.
2
5.1.1.

Functions of the keys

Display
1
> [Escape] or J key
2
D Heating temperature key or [-]
3
N DHW temperature key or [+]
4
S [Enter] or cancel d Key lock-out
5
B [Chimney-sweeping] keys
6
(press the 2 and 3 keys simultaneously)
f [Menu] keys
7
(press the 4 and 5 keys simultaneously)
a On/off switch
8
5.1.2.

Meaning of the symbols on the display

On/Off switch:
a After 5 lock-outs, the boiler must be switched off/on
again.
Shunt pump:
b
The pump operates.
Central heating function:
D
Access to central heating temperature parameter.
DHW function:
N
Access to domestic hot water temperature parameter.
Yellow display with the symbols:
K
$ + K + Z (Maintenance message).
Water pressure:
e
The water pressure is too low.
Battery symbol:
g
Status of battery of wireless controller.
Signal strength symbol:
[
Signal strength of the wireless controller.
Quinta Pro 30 - 45 - 65 - 90 - 115
09/06/2011 - 123157-AF