Upgrading Media Operations Xml Gateway To A.06.11; Upgrading On Windows; Upgrading On Hp-Ux - HP Data Protector A.06.11 User Manual

1. Run setup.exe for the Server version A.06.11. This starts the upgrade wizard
for Media Operations Server installation. The upgrade process stops all the
running A.06.00 or A.06.10 server services and copies the new files onto them.
2. If XML Gateway is installed on the same system as the server, upgrade the
gateway manually to the newer version.

Upgrading Media Operations XML Gateway to A.06.11

Use the following procedure if XML Gateway version A.06.00 or A.06.10 is installed
on your system.

Upgrading on Windows

NOTE:
If the Media Operations Server and the XML Gateway are installed on the same
system, stop all Media Operations services before starting the upgrade. This will
avoid re-starting the system once the upgrade is completed.
1. Run setup.exe for the XML Gateway version A.06.11. This starts the upgrade
wizard for the XML Gateway installation. The upgrade process stops the running
XML Gateway on the system and copies the new files onto the existing ones.
2. After a successful upgrade, the XML Gateway services start up.

Upgrading on HP-UX

NOTE:
You must have root permission to perform the upgrade.
Install the new version of XML Gateway by executing the command:
swinstall –s
HPMedOps
For more details, see
<A.06.11_depot_location> /HPMedOps.depot
"Installing XML Gateway on Unix" on page 32.
User guide 37