Basic Keyboard Controls; Sending The Dome To A Preset; Special Presets; Table 3-3 Special Presets - Honeywell HDZ30A User Manual

48 | HDZ Series Analogue PTZ User Manual

Basic Keyboard Controls

HDZ Series analogue PTZ dome is compatible with the UltraKey Touch (HJC4000). The control
keyboards have some predefined commands to perform functions with the camera. See the
following sections for more information on these commands.
The setup options in the OSD menu are described in

Sending the Dome to a Preset

A preset is a memorized PTZ position, showing a specific field of view, that can be recalled
manually by the operator, or automatically moved to when triggered by an event, such as
motion.
To go to a preset using the UltraKey controller (HJC4000), press View, then the preset number,
and then Enter.
For example:

Special Presets

Special presets 72 to 99 are reserved for controlling and programming the dome. Do not
program preset positions for presets 72 to 99. See for a list of the special presets and their
functions.
Preset Function
72 Recover encrypted user login
Enable broadcast command receive mode
73
(displays: Broadcast RX Mode ON)
Disable broadcast command receive mode
74
(displays: Broadcast RX Mode OFF)
Opens Setup Menu 1 with the password field
75
selected
76 Run mimic tour 1–16
77 Program mimic tour
78 Run preset tour 1–16
79 User default setting preset
www.honeywell.com/security

Press View
Table 3-3 Special Presets
Chapter 4, Operation and
 
1 4 Ent to tell the camera to go to Preset 14.
Protocol
Diamond, MAXPRO-mode, VCL, Pelco P,
Pelco D
MAXPRO-mode, VCL, Pelco P, Pelco D
Diamond, MAXPRO-mode, VCL, Pelco P,
Pelco D
Configuration.