26 | equIP® Series 30x Zoom WDR PTZ Camera User Guide
Configuring Presets
To add a preset:
1.
2.
3.
4.
To rename a preset:
•
To remove a preset:
•
To remove all presets:
•
www.honeywell.com/security
Position the PTZ dome for the preset using the pan, tilt, and zoom controls below the
preview window. By default, Step is set at 5. Select a lower value for more precise
positioning.
In the Preset section, click Add. A preset is added to the list.
Click the Save button to save the preset.
To add another preset, repeat steps 2 to 4 above. You can add up to 80 presets.
In the Preset section, double-click the name of the preset to make it editable, type the
new name, and then press Enter.
In the Preset section, click the Delete button of the preset that you want to remove.
In the Preset section, click Clear.