2.
Using two M5 machine screws and an adapter plate, attach the rail
to the front of the rack (see Figure 2 and Figure 3).
Do not tighten the screws.
3.
Adjust the rail size on the rail assembly for the depth of your rack
(see Figure 4).
®
EATON Powerware
9140 UPS (7.5–10 kVA) User's Guide
Figure 3. Securing the Front Rail
Rear
Figure 4. Adjusting the Rail Depth (Right Rail Assembly Shown)
S
164201622 Rev A FINAL DRAFT 14-Jul-2006
INSTALLATION
Front M5 Screws
Position 6
Position 5
Position 4
Position 1
Adapter Plate
Front
23