Eaton Powerware 9140 User Manual page 40

INSTALLATION
2.
3.
32
EATON Powerware
Using two M5 machine screws and an adapter plate, attach the rail
to the front of the rack (see Figure 14 and Figure 15).
Do not tighten the screws.
Figure 15. Securing the Front Rail
Adjust the rail size on the rail assembly for the depth of your rack
(see Figure 16).
Rear
Figure 16. Adjusting the Rail Depth (Right Rail Assembly Shown)
®
9140 UPS (7.5–10 kVA) User's Guide
Front M5 Screws
Position 1
Adapter Plate
Front
S
164201622 Rev A FINAL DRAFT 14-Jul-2006
Position 6
Position 5
Position 4