Eaton Powerware 9135 Two-in-One UPS 5000/6000 VA User Manual
  1. Manuals
  2. Brands
  3. Eaton Manuals
  4. UPS
  5. 9135 Two-in-One UPS 5000/6000 VA
  6. User manual

Eaton Powerware 9135 Two-in-One UPS 5000/6000 VA User Manual

Two-in-one ups 5000/6000 va
Hide thumbs
Table of Contents

Advertisement

Quick Links

®
Powerware 9135 Two−in−One UPS
5000/6000 VA
User's Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Powerware 9135 Two-in-One UPS 5000/6000 VA and is the answer not in the manual?

Questions and answers

Related Manuals for Eaton Powerware 9135 Two-in-One UPS 5000/6000 VA

Summary of Contents for Eaton Powerware 9135 Two-in-One UPS 5000/6000 VA

  • Page 1 ® Powerware 9135 Two−in−One UPS 5000/6000 VA User’s Guide...

  • Page 2: Requesting A Declaration Of Conformity

    Phone: +358−9−452 661 Fax: +358−9−452 665 68 Eaton, Powerware, ABM, FERRUPS, LanSafe, and X−Slot are registered trademarks and ConnectUPS is a trademark of Eaton Corporation or its subsidiaries and affiliates. IBM, AS/400, and iSeries are registered trademarks of International Business Machines Corp. National Electrical Code and NEC are registered trademarks of National Fire Protection Association, Inc.
  • Page 3 Class A EMC Statements FCC Part 15 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to NOTE part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

  • Page 4: Special Symbols

    Special Symbols The following are examples of symbols used on the UPS or accessories to alert you to important information: RISK OF ELECTRIC SHOCK symbol. CAUTION: REFER TO OPERATOR’S MANUAL information, such as important operating and maintenance instructions. This symbol indicates that you should not discard the UPS or the UPS batteries in the trash. This product contains sealed, lead-acid batteries and must be disposed of properly.

  • Page 5: Table Of Contents

    ..............EATON Powerware .
  • Page 6 ............Two−Year Limited Warranty (US and Canada) Ten−Year Pro−Rated Limited Warranty (US and Canada) Load Protection Guarantee (US and Canada) EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide www.powerware.com .

  • Page 7: Introduction

    With the Powerware 9135, you can safely eliminate the effects of power disturbances and guard the integrity of your equipment. Figure 1 shows the Powerware 9135 UPS.
  • Page 8 INTRODUCTION Providing outstanding performance and reliability, the Powerware 9135’s unique benefits include: Online UPS design with pure sine wave output. The UPS filters and regulates incoming AC power and provides consistent power to your equipment without draining the battery. Two−in−one form factor for using the UPS in a rack−mount configuration or as a standalone cabinet.

  • Page 9: Safety Warnings

    To comply with international standards and wiring regulations, the sum of the leakage current of the UPS and the total equipment connected to the output of this UPS must not have an earth leakage current greater than 3.5 milliamperes. EATON Powerware IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS...
  • Page 10 Installér denne UPS i et temperatur− og fugtighedskontrolleret indendørsmiljø, frit for ledende forureningsstoffer for at formindske risikoen for brand og elektrisk stød. Rumtemperaturen må ikke overstige 40°C. UPS’en bør ikke betjenes nær vand eller høj fugtighed (maksimalt 95%). EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide www.powerware.com...

  • Page 11: Belangrijke Veiligheidsinstructies

    0 V. Als de ingangsbedrading loopt van fase naar fase dan bedraagt de spanning op de uitgangscontactdozen 115V (gemeten tussen fase en aarde of tussen fase en neutraal, afhankelijk van de UPS−bedrading). EATON Powerware A D V A R S E L BELANGRIJKE VEILIGHEIDSINSTRUCTIES...
  • Page 12 Nooit batterijen in het vuur gooien. De batterijen kunnen ontploffen. Vervang de accu’s door accu’s met hetzelfde nummer en van hetzelfde type als de oorspronkelijke accu’s in de UPS. EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide www.powerware.com...

  • Page 13: Tarkeita Turvaohjeita

    Akusto täytyy hävittää säädösten mukaisella tavalla. Noudata paikallisia määräyksiä. Älä koskaan heitä akkuja tuleen. Ne voivat räjähtää. Vaihda UPS−virtalähteeseen vain samanlaiset akut ja sama määrä akkuja kuin siinä oli alun perin. EATON Powerware TÄRKEITÄ TURVAOHJEITA − SUOMI SÄILYTÄ NÄMÄ OHJEET V A A R A...

  • Page 14: Consignes De Sécurité

    Afin d’être conforme aux normes et règlements internationaux de câblage, le courant de fuite à la terre de la totalité du matériel branché sur la sortie de l’onduleur ne doit pas dépasser 3,5 mA. EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide www.powerware.com...
  • Page 15 Ausgangssteckverbindern 0 Volt. Bei einer Verkabelung mit Außenleitern beträgt die Spannung an den Ausgangssteckverbindern 110–120 Volt (gemessen von Leitung zu Masse oder Leitung zu Masseleiter, abhängig von der UPS (USV)−Verkabelung. EATON Powerware A T T E N T I O N ! WICHTIGE SICHERHEITSANWEISUNGEN...

  • Page 16: Importanti Istruzioni Di Sicurezza

    La TENSIONE contenuta in questo gruppo statico di continuità è LETALE. Tutte le operazioni di riparazione e di manutenzione devono essere effettuate ESCLUSIVAMENTE DA PERSONALE TECNICO AUTORIZZATO. All’interno del gruppo statico di continuità NON vi sono PARTI RIPARABILI DALL’UTENTE. EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide www.powerware.com...
  • Page 17 Non gettare mai le batterie nel fuoco poichè potrebbero esplodere se esposte alle fiamme. Sostituire le batterie con altre dello stesso numero e tipo di quelle originariamente installate nell’UPS. EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide SAFETY WARNINGS...

  • Page 18: Viktig Sikkerhetsinformasion

    Alt utstyr som er forbundet med utgangen av denne UPS’en må ikke ha en sterkere total lekkasjestrøm enn 3,5 milliampere for å være i overensstemmelse med internasjonale standarder og forkablingsbestemmelser. EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide www.powerware.com...

  • Page 19: Regulamentos De Segurança

    Não remova ou desconecte o cabo de entrada quando a UPS estiver ligada. Isto removerá o aterramento de segurança da UPS e do equipamento conectado. EATON Powerware F O R S I K T I G GUARDE ESTAS INSTRUÇÕES C U I D A D O A D V E R T Ê...
  • Page 20  äàííîì ÈÁÏ èìåþòñÿ ÑÌÅÐÒÅËÜÍÎ ÎÏÀÑÍÛÅ ÍÀÏÐßÆÅÍÈß. Âñå ðàáîòû ïî ðåìîíòó è îáñëóæèâàíèþ äîëæíû âûïîëíÿòüñÿ ÒÎËÜÊÎ ÓÏÎËÍÎÌÎ×ÅÍÍÛÌ ÎÁÑËÓÆÈÂÀÞÙÈÌ ÏÅÐÑÎÍÀËÎÌ. Âíóòðè ÈÁÏ íåò óçëîâ, ÎÁÑËÓÆÈÂÀÅÌÛÕ ÏÎËÜÇÎÂÀÒÅËÅÌ. EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide www.powerware.com P E R I G O ÑÎÕÐÀÍÈÒÅ...
  • Page 21 ìåñòíûì íîðìàòèâíûì àêòàì çà èíôîðìàöèåé î òðåáîâàíèÿõ ê óòèëèçàöèè. Íèêîãäà íå áðîñàéòå àêêóìóëÿòîðû â îãîíü. Àêêóìóëÿòîðû ìîãóò âçîðâàòüñÿ ïîä âîçäåéñòâèåì îãíÿ. Çàìåíÿéòå áàòàðåè ÈÁÏ òîëüêî òàêèì æå êîëè÷åñòâîì áàòàðåé àíàëîãè÷íîãî òèïà. EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide SAFETY WARNINGS 164201726 Rev 1 www.powerware.com...

  • Page 22: Advertencias De Seguridad

    Para cumplir con los estándares internacionales y las normas de instalación, la totalidad de los equipos conectados a la salida de este SIE no debe tener una intensidad de pérdida a tierra superior a los 3,5 miliamperios. EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide www.powerware.com...
  • Page 23 UPS:ens anslutning). Ta aldrig bort nätsladden när UPS−enheten är påslagen. Detta tar bort skyddsjordningen från både UPS−enheten och den anslutna utrustningen. EATON Powerware P R E C A U C I Ó N VIKTIGA SÄKERHETSFÖRESKRIFTER SPARA DESSA FÖRESKRIFTER...
  • Page 24 Batterierna måste avyttras enligt anvisningarna i lokal lagstiftning. Använda batterier får aldrig brännas upp. De kan explodera. Byt ut batterierna mot samma antal och typer av batterier som ursprungligen installerats i UPS−enheten. EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide www.powerware.com...

  • Page 25: Installation

    NOTE Check the battery recharge date on the shipping carton label. If the date has expired and the batteries were never recharged, do not use the UPS. Contact your service representative. EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide 164201726 Rev 1 www.powerware.com...

  • Page 26: Checking The Accessory Kit

    NOTE Packaging must be destroyed according to waste management standards. Recycling icons are displayed for easy selection. Verify that the following additional items are included with the UPS: Table 1. UPS Accessory Kit EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide www.powerware.com...
  • Page 27 EBM user’s guide EBM cable EBM communication cable Rackmounting kit for 19−inch (48 cm) bays Pedestal extenders for tower position Joining bracket and screws for tower position EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide INSTALLATION 164201726 Rev 1 www.powerware.com...

  • Page 28: Connecting The Ups Internal Battery

    Slide the battery connector so that you can read Connected (see Figure 3). Reinstall the two screws removed in Step 2. Continue to the following section, UPS Setup." EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide www.powerware.com Battery Switch Figure 2.

  • Page 29: Ups Setup

    UPS Setup The Powerware 9135 UPS is designed for flexible configurations and can be installed in a rack or as a standalone cabinet. If you are installing the UPS in a rack, continue to the following section, Rackmount Setup;" otherwise, continue to Tower Setup" on page 30.

  • Page 30: Installing The Rail Kit

    NOTE The rails and the necessary mounting hardware are supplied by Eaton. To install the rail kit: Adjust the UPS control panel orientation by slightly pulling out the control panel and rotating it 90° counterclockwise (see Figure 4). EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide www.powerware.com C A U T I O N Figure 4.
  • Page 31 Place the front panel above the UPS. Remove the two battery retaining brackets (four screws). Slightly pull the battery tray, then lift it to extract it. Figure 5. Removing the Battery Tray EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide INSTALLATION 164201726 Rev 1 www.powerware.com...
  • Page 32 INSTALLATION Place the Powerware cabinet on a flat, stable surface with the front of the cabinet facing you. NOTE You can adjust the position of the mounting brackets. Align the mounting brackets with the screw holes on the side of the cabinet and secure with the supplied M4 6 mm flat−head screws.
  • Page 33 Secure the rail to the front of the rack with two M6 12 mm screws. 10. Repeat Steps 8 and 9 for the other rail. EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide Figure 7. Installing the Rails 164201726 Rev 1 www.powerware.com...
  • Page 34 12. Slide the UPS and any optional EBMs into the rack. 13. Secure the front of the cabinet to the rack using two M6 12 mm round−head screws on each side (see Figure 9). EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide www.powerware.com...
  • Page 35 15. If you removed the UPS battery tray in Step 2, replace the battery tray and secure with the battery retaining brackets. Replace the UPS front cover. 16. Continue to Installing the UPS" on page 35. EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide INSTALLATION 164201726 Rev 1 www.powerware.com...

  • Page 36: Tower Setup

    Carefully position the cabinet upright with the UPS indicators at the top and place in the pedestals (see Figure 12). Adjust the pedestals to the size of the UPS and secure the pedestals with the captive screws. EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide www.powerware.com C A U T I O N Figure 11.
  • Page 37 INSTALLATION UPS Indicators 150 mm (6") 450 mm (17.7") Figure 12. Tower Position with One Cabinet Continue to the following section, Installing the UPS." EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide 164201726 Rev 1 www.powerware.com...
  • Page 38 For two cabinets, insert the extender into position 3 on the pedestal (see Figure 13). For three cabinets or more, insert the extender into position 4 on the pedestal (see Figure 14). EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide www.powerware.com Figure 13.
  • Page 39 (see Figure 15). Adjust the pedestals to the size of the UPS and secure the pedestals with the captive screws. Figure 15. Tower Position with Two Cabinets EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide INSTALLATION 164201726 Rev 1 www.powerware.com...
  • Page 40 NOTE Joining brackets are required for installations with two or more cabinets. 10. If installing additional EBMs, repeat Step 6 for each cabinet. 11. Continue to the following section, Installing the UPS." EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide www.powerware.com...

  • Page 41: Installing The Ups

    RJ−11 port. See Figure 17. Up to four EBMs may be connected to the UPS. Battery Circuit Breaker EBM Battery Connectors Figure 17. UPS Installation with Three EBMs EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide INSTALLATION EBM Cable Communication Cable 164201726 Rev 1 www.powerware.com...
  • Page 42 If you are installing a remote power−off (RPO) switch, see the following section, RPO Installation," to install the switch before powering on the UPS. Continue to UPS Electrical Connections" on page 38. EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide www.powerware.com...

  • Page 43: Rpo Installation

    Installation of the RPO function must be carried out in compliance with applicable regulations. The cable is not included. In order to fully de−energize devices and the Powerware 9135 with the RPO port, it is necessary to: Use a two−position switch (normally−open or normally−closed contact and held more than one second).

  • Page 44: Ups Electrical Connections

    If these recommendations are not followed, protection discrimination is not achieved and may result in a potential power interruption to the connected devices. UPS Power Rating EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide www.powerware.com W A R N I N G...

  • Page 45: Recommended Downstream Protection (Eu Models Only)

    Capacity for ground/ earthing conductor Continue to the following section, Connecting the Power Cables (EU Models)," or to Connecting the Power Cables (U Models)" on page 42. EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide INSTALLATION Downstream Circuit Breaker EU Models Only Z curve −...

  • Page 46: Connecting The Power Cables (Eu Models)

    Connect the three wires to the input terminal block. Always connect the ground/earthing wire first. Insert the output cable through the output cable opening. Connect the three wires to the output terminal block. EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide www.powerware.com W A R N I N G Figure 21.
  • Page 47 Connect any high−power devices to the 16A outlet. Install the cord−retention brackets to secure the cords and provide strain relief. (4) Priority Receptacles (4) Non−Priority Receptacles EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide Figure 22. Installing the Input and Output Cables (EU Models) Cord−Retention Brackets Figure 23.

  • Page 48: Connecting The Power Cables (U Models)

    Connect the three wires to the input terminal block. Always connect the ground/earthing wire first. Insert the output cable through the output cable opening. Connect the three wires to the output terminal block. EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide www.powerware.com...
  • Page 49 NOTE If more than one load is connected to the UPS, the total capacity of the loads should not exceed 30A. Figure 26. Connecting the Power Cords (U Models) EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide INSTALLATION...

  • Page 50: Ups Rear Panels

    INSTALLATION UPS Rear Panels This section shows the rear panels of the Powerware 9135 models. Output Terminal Block Input Terminal Block EBM Battery Connector USB Port RS−232 Port EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide www.powerware.com SWITCHED GROUP 1 RS−232...
  • Page 51 Output Terminal Block Input Cord with L6−30P EBM Battery Connector USB Port RS−232 RS−232 Port Figure 28. 5000/6000 VA, U Models EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide INSTALLATION (4) L6−30 Receptacles Communication Bay Relay Port RPO Port BATT.
  • Page 52 INSTALLATION EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide 164201726 Rev 1 www.powerware.com...

  • Page 53: Operation

    UPS itself, load status, events, measurements, and settings (see Figure 29). NOTE The On/Off button controls only the UPS output. The On/Off button has no effect on equipment connected to the UPS. EATON Powerware Battery Indicator Power Indicator Escape On/Off Button Figure 29.

  • Page 54: Turning The Ups On

    To turn on the UPS without using utility power, press and hold the button for three seconds. The UPS starts up in Battery mode and supplies battery power to your equipment. EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide www.powerware.com...

  • Page 55: Turning The Ups Off

    For a full shutdown of UPS and connected load, the upstream circuit breaker (not included) should be set to the OFF position. Operating Modes The Powerware 9135 front panel indicates the UPS status through the UPS indicators. Figure 30 shows the UPS front panel indicators and controls.

  • Page 56: Normal Mode

    End of backup time: all indicators turn off. The alarm beeps continuously and the UPS displays End of backup time Battery low. When utility power is restored after the UPS shuts down, the UPS automatically restarts. EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide www.powerware.com indicator illuminates.

  • Page 57: Bypass Mode

    There is an overload condition There is a malfunction utility power. Display Functions Figure 31 shows the basic menu structure. Local Settings EATON Powerware button is pressed indicators illuminate and the equipment is powered by Status and Alarms Status and Alarms Measurements...

  • Page 58: Access To Measurements

    International (DD−MM−YYYY/HH :MM) Date / Time Change GMT + 1 (Continental Europe) Audible Alarm EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide www.powerware.com button on the UPS front panel to access measurements for button to get access. Figure 32. Access to UPS Setup...
  • Page 59 Enable Auto Restart Enable Energy Saving Disable Sleep Mode Enable Remote Command Enable EATON Powerware Options 200V / 208V / 220V / 240V / 250V Enable 60 Hz Enable 0.5 Hz / sec 20 ms, ... , 200 ms 40%, 50%, 70%...

  • Page 60: Access To Maintenance

    Deep Disch Protect Access to Maintenance To access the Maintenance menu: Scroll to the Maintenance menu by pressing the Press the EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide www.powerware.com Options Comments No test / everyday /...

  • Page 61: Life Cycle Monitoring

    Auto Statistics Custom Statistics Life Cycle Monitoring LCM displays messages on the UPS front panel and through the communication channels, at every important stage of the UPS´s life. Press the EATON Powerware Option/Display SN: xxxxxxxxx SOFT: xxx Description Date Hour...

  • Page 62: Anticipate Maintenance

    To disable all LCM messages, select disable all while in the LCM menu. Be careful: if you disable all LCM messages, you will not be aware of any LCM events that can happen on the UPS. EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide www.powerware.com Signification Battery is approaching its reliability end of life.

  • Page 63: Additional Ups Features

    Communication ports Network Management Card Load segments (PowerShare) Communication Ports The Powerware 9135 provides three communication methods that can be used simultaneously: RS−232 or USB communication. Compatible with most power management software applications. Note that both ports cannot be used at the same time.

  • Page 64: Usb Port

    Powerware LanSafe HID−compliant power management software compatible with Microsoft Windows NOTE The latest versions of the Powerware LanSafe Power Management Software and the USB firmware are available at www.powerware.com. To establish communication between the UPS and a computer: The USB port is hot−pluggable. Connect the USB cable to the USB port on the UPS rear panel (see Figure 35).

  • Page 65: Relay Port

    Remote Power−off signal (5–27 Vdc, 10 mA max) Operation on mains (not on battery) User common Operation on automatic bypass Low Battery Load protected Operation on battery EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide ADDITIONAL UPS FEATURES Common Normally−closed (NC) 164201726 Rev 1...

  • Page 66: Network Management Card (Optional)

    It is not necessary to shut down the UPS before installing a communication card. Remove the slot cover secured by two screws. Insert the communication card into the slot. Secure the card with both screws. EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide www.powerware.com SWITCHED GROUP 1 RS−232...

  • Page 67: Eu Model Load Segments (Powershare)

    See your power management software manual for details (refer to www.powerware.com for the latest information). NOTE If power management software is not used, the individual load segments cannot be controlled.
  • Page 68 ADDITIONAL UPS FEATURES EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide 164201726 Rev 1 www.powerware.com...

  • Page 69: Maintenance

    Replace the faulty power module with one of the same power rating (5000 VA or 6000 VA) and secure with the power module brackets. Replace the UPS front cover. EATON Powerware W A R N I N G Figure 39. Removing the Power Module ®...

  • Page 70: Hot−Swapping The Battery Tray

    Replace the battery tray and secure with the battery retaining brackets. NOTE To ensure safety and high performance, use only batteries supplied by Eaton. Replace the UPS front cover. EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide www.powerware.com C A U T I O N Figure 40.

  • Page 71: Specifications

    Up to 40 Hz in low−sensitivity mode (programmable using the UPS front panel (see page 52). Adjustable to 200V (10% derating of output power) 208/220/230/240/250V. Table 11. Dimensions and Weights Model 5000 VA UPS 6000 VA UPS UPS Power Module UPS Internal Battery EATON Powerware AC Input Nominal Voltage Frequency Voltage Range Range 208V 156–280V...
  • Page 72 5000 VA 5 min 6000 VA 4 min NOTE Battery times are approximate and vary depending on the load configuration and battery charge. EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide www.powerware.com Input Connection 10 ft, L6−30P power cord Hardwired (8) 10A, IEC 320−C13;...

  • Page 73: Troubleshooting

    Press the esc button to stop the audible alarm. NOTE In case of "MULTIPLE FAULT", press the to further details. NOTE In case of "LCM WARNING", see Life Cycle Monitoring" on page 55. EATON Powerware Escape Figure 41. Troubleshooting LED ®...

  • Page 74: Troubleshooting Not Requiring Eaton Service

    INV THERM OVERLOAD The UPS shuts down automatically because of a major overload. INVERT LIMITATION Short circuit conditions on output devices. EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide www.powerware.com Figure 42. Environment Fault button to display the following details: Correction Check battery connections.

  • Page 75: Troubleshooting Requiring Eaton Service

    Battery fault detected during the battery test. Use "Enter" button to display details. FRAME FAULT Internal chassis fault detected. Use "Enter" button to display details. EATON Powerware button and the Escape Figure 43. Troubleshooting LED Correction Call the Help Desk. Replace the power module (see page 63).

  • Page 76: Service And Support

    A replacement or repair unit will be shipped, freight prepaid for all warrantied units. NOTE For critical applications, immediate replacement may be available. Call the Desk for the dealer or distributor nearest you. EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide www.powerware.com 1−800−356−5737 1−919−870−3149...

  • Page 77: Warranty

    This limited warranty (this Warranty") applies only to the original End−User (the End−User") of any Powerware 3105, 9120, 9125, 9135, 9140, and FERRUPS up to 3.1 kVA Products (individually and collectively, the Product") purchased on or after June 1, 2004 and cannot be transferred. This Warranty applies even in the event that the Product is initially sold by Company for resale to an End−User.
  • Page 78 Product is sold, Company shall have no obligation under this Warranty. Also during such time, the period of this Warranty shall continue to run and the expiration of this Warranty shall not be extended upon payment of any overdue or unpaid amounts. EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide 164201726 Rev 1 www.powerware.com...

  • Page 79: Ten−Year Pro−Rated Limited Warranty (Us And Canada)

    In the USA, call the Customer Reliability Center 7x24 at 800−356−5737. Outside of the USA, call your local Powerware product sales or service representative, or call the Customer Reliability Center in the USA at 919−870−3149. For comments or questions about this Warranty, write to the Customer Quality Representative, 3301 Spring Forest Road, Raleigh, North Carolina 27616 USA.
  • Page 80 In order to receive the benefits of this Warranty, the End−User must use the Product in a normal way; follow the Product’s operation and maintenance manual; and protect against further damage to the Product if there is a covered defect. EATON Powerware ® 9135 Two−in−One UPS (5000/6000 VA) User’s Guide 164201726 Rev 1 www.powerware.com...

  • Page 81: Load Protection Guarantee (Us And Canada)

    In the USA, call the Customer Reliability Center 7x24 at 800−356−5737. Outside of the USA, contact your local Powerware product sales or service representative, or call the Customer Reliability Center in the USA at 919−870−3149. Company will not accept any Product for return, credit or exchange unless expressly authorized by Company in writing and delivered FOB Company factory.
  • Page 82 In the USA, call the Customer Reliability Center 7x24 at 800−356−5737. Outside of the USA, contact your local Powerware product sales or service representative, or call the Customer Reliability Center in the USA at 919−870−3149. For comments or questions about this Load Protection Guaranty, write to the Customer Quality Representative, 3301 Spring Forest Road, Raleigh, North Carolina 27616 USA.

This manual is also suitable for:

Powerware 9135

Table of Contents