INSTALLATION
15. If the optional seismic mounting brackets are installed, secure the
Figure 23. Securing the Optional UPS Seismic Mounting Brackets
16. Replace the electronics module by sliding it carefully into the
38
EATON Powerware
brackets on the UPS to the rack using four M6 machine screws as
shown in Figure 23.
Tighten the wing bolts on the seismic mounting brackets.
cabinet. Verify that it seats against the rear of the cabinet.
Turn the module lock switch to the LOCK position.
®
9140 UPS (7.5–10 kVA) User's Guide
S
164201622 Rev A FINAL DRAFT 14-Jul-2006
M6 Screws