Eaton Powerware 9140 User Manual page 43

9. If the front and rear mounting brackets are already installed, skip to
Step 12. If the brackets are not already installed, continue to
Step 10.
10. Align the four front mounting brackets with the screw holes on the
sides of the UPS and secure with 16 supplied M4 flat-head screws
(see Figure 20).
11. Align the two rear mounting brackets with the lowest two screw
holes on the sides of the UPS and secure with four supplied M4
flat-head screws.
Figure 20. Installing the UPS Front and Rear Mounting Brackets
®
EATON Powerware 9140 UPS (7.5–10 kVA) User's Guide
Rear Mounting
Brackets (2)
S
164201622 Rev A FINAL DRAFT 14-Jul-2006
INSTALLATION
Front Mounting
Brackets (4)
35