13. Slide the UPS into the rack. Verify that the rear mounting brackets
engage in and slide easily along the inside of the rails.
14. Secure the front of the cabinet to the rack as shown in Figure 22.
If the rack holes are square, use six cage nuts. If the rack holes are
round, use six clip nuts.
UPS
Optional
EBM
®
EATON Powerware
9140 UPS (7.5–10 kVA) User's Guide
Figure 22. Securing the Front of the UPS
S
164201622 Rev A FINAL DRAFT 14-Jul-2006
INSTALLATION
Position 17
(M6 screw
and
cage/clip
Position 11
nut)
Position 8
Position 3 (M5 screw)
Position 2 (M5 screw)
37