Power On/Power Off; Setup Using Bosch Video Client - Bosch VJT-X20XF-E Installation And Operating Manual

VideoJet XF E

Further topics:
–
4.5

Power on/Power off

Power supply
The VideoJet XF E does not have a power switch. Power is supplied via a separate unit.
Connect the VideoJet XF E to the power supply unit and plug this into the mains. The unit is
now ready for use. The VideoJet XF E comes supplied with an appropriate power supply unit.
CAUTION!
Use only the power supply unit provided or another power suppply unit with UL approval and
a power output according to LPS or NEC Class 2.
Where necessary, use suitable equipment to ensure that the power supply is free from
interference such as voltage surges, spikes or voltage drops.
Do not connect the VideoJet XF E to the power supply until all other connections have been
made.
1.
2.
Provided the network connection has been correctly made, the green LINK LED also lights up.
The flashing green LED CONNECT signals that data packets are being transmitted via the
network.
4.6

Setup using Bosch Video Client

For the current version of the Bosch Video Client (BVC) management software, access your
Bosch product catalog on the Internet. This program allows you to implement and set up the
encoder in the network quickly and conveniently.
Installing the program
1.
2.
3.
4.
Configuring the VideoJet XF E
You can start Bosch Video Client immediately after installation.
1.
2.
3.
Bosch Sicherheitssysteme GmbH
Connect the lines to the appropriate terminals R on the orange terminal block and check
that the connections are secure.
Section 8.8 Terminal block, page 109
Connect the power supply unit to the 12V DC socket on the VideoJet XF E. The jack must
fit a pin of 2 mm (0.079 in) in diameter (polarity:
Connect the power supply unit to the mains. The VideoJet XF E is ready for use as soon
as the CONNECT LED changes from a red light, indicating the start-up procedure, to a
green light.
Download the Bosch Video Client from the Bosch product catalog on the Internet.
Unzip the file.
Double-click the installer file.
Follow the instructions on the screen to complete the installation.
Double-click the
application via the Start button and the Programs menu (path: Start/Programs/Bosch
Video Client/Bosch Video Client).
When the program is started for the first time, a wizard opens to help you detect and
configure devices on the network.
If the wizard does not start automatically, click
application. Then, click Configuration Wizard... on the Tools menu.
Installation and Operating Manual
icon on the desktop to start the program. Alternatively, start the
Installation | en
).
to open the Configuration Manager
DOC | V5.51 | 2012.03
21