Power On/Power Off - Bosch VJD-8000 Installation Manual

VIDEOJET decoder 8000
5.6

Power on/power off

VIDEOJET decoder 8000 is equipped with a power switch on its front panel.
The VIDEOJET decoder 8000 automatically starts up when connected to mains power. The
blue LED on the front next to the switch lights up. During the boot process, the orange LED
flashes.
1.
2.
3.
All information regarding the functions and the operation can be found in the relevant
documentation of Monitor Wall, Bosch Video Management System, or Video Client.
See also
–
Bosch Security Systems B.V.
Switch on the monitor in order to see the user interface after the boot-up procedure.
To switch off, press the power switch. The blue LED turns off.
Press the power switch again to switch on the unit.
LEDs, page 19
Installation Manual
Connection | en 15
2015.08 | V1 | DOC