VideoJet XF E
5.18
Advanced Mode: Video Input
You can activate the 75 Ohm terminating resistance for each video input of the VideoJet XF E.
The terminating resistance must be deactivated for the video signal to be looped through.
Every video input is closed at the time of delivery.
NOTICE!
The numbering follows the labeling of the video inputs on the VideoJet XF E.
75 Ohm termination
Select Off if the video signal is to be looped through.
Bosch Sicherheitssysteme GmbH
Installation and Operating Manual
Configuration using a Web browser | en
DOC | V5.51 | 2012.03
41