Running Recording Program - Bosch VJT-X20XF-E Installation And Operating Manual

VideoJet XF E
1.
2.
Image resolution
Sequences are saved at the resolution that has been preset in the configuration for the
encoder.
Further topics:
–
–
–
6.5

Running recording program

The
automatic recording.
A moving graphic will appear to indicate a running recording. If no recording is taking place, a
static icon is displayed.
You can ascertain from the Dual View view (VideoJet X20 XF E) or the Quad View view
(VideoJet X40 XF E) for which camera a recording is running by moving the cursor over the
icon. A message is displayed below the cursor.
Bosch Sicherheitssysteme GmbH
Click to start recording. The storage location depends on the configuration of the
VideoJet XF E. A red dot in the icon indicates that recording is in progress.
Click to stop recording.
Section Allow local recording, page 39
Section Path for JPEG and video files, page 39
Section 5.21 Advanced Mode: Encoder Profile, page 44
hard drive icon below the camera image on the LIVEPAGE changes during an
Installation and Operating Manual
Operation | en 97
DOC | V5.51 | 2012.03