Operation Using Software Decoders - Bosch VJT-X20XF-E Installation And Operating Manual

102 en | Operation
Connecting on alarm
With the appropriate configuration, a connection between a sender and a receiver is made
automatically when an alarm is triggered. After a short time the live video image from the
sender appears on the connected monitor.
This option can also be used to connect a sender and a compatible receiver using a switch
connected to the alarm input. You do not need a computer to make the connection in this
case.
Further topics:
–
Connecting with a terminal program
Various requirements must be met in order to operate with a terminal program.
1.
2.
3.
Closing the connection with a terminal program
1.
2.
Further topics:
–
6.8

Operation using software decoders

The video server VideoJet XF E provides a highly efficient systems solution together with the
Bosch Video Client software.
Bosch Video Client is a software package for operating, controlling and managing CCTV
installations (such as surveillance systems) at remote locations. It runs under Microsoft
Windows operating systems. It is primarily designed for decoding video, audio and control
data received from a remote sender.
There are many options available for operation and configuration when using a VideoJet XF E
with Bosch Video Client. Please refer to the software documentation for more details.
Another program that supports the VideoJet XF E is Bosch Video Management System.
Bosch Video Management System is an IP video security solution that enables the seamless
management of digital video, audio and data over any IP network. It was developed for use
with Bosch CCTV products as one component of an extensive video security management
system. It allows you to integrate your existing components into a simple-to-control system or
into the entire Bosch range, benefiting from a complete security solution based on the latest
technology and years of experience.
The VideoJet XF E video server is also designed for use with the DiBos 8 digital recorder.
DiBos 8 records up to 32 video and audio streams and is available as IP software or hybrid
DVR with additional analog camera and audio inputs. DiBos supports the most diverse
functions on the VideoJet XF E video server, for example relay activation, remote control of
peripherals and remote configuration. DiBos 8 can use the alarm inputs for event triggering
DOC | V5.51 | 2012.03
Section 5.30 Advanced Mode: Alarm Connections, page 60
Start the terminal program and enter the command 4 in the main menu to switch to the
Rcp+ menu.
Enter the command c in the Rcp+ menu to change the remote IP address, then enter the
IP address of the unit you wish to connect to.
In the Rcp+ menu, enter command 1 to activate automatic connection.
Start the terminal program and enter the command 4 in the main menu to switch to the
Rcp+ menu.
In the Rcp+ menu, enter command 3 to deactivate automatic connection.
Section 8.9 Communication with terminal program, page 110
Installation and Operating Manual
VideoJet XF E
Bosch Sicherheitssysteme GmbH