Bosch VJT-X20XF-E Installation And Operating Manual page 95

VideoJet XF E
To select a particular region of interest:
1.
2.
When you use the electronic pan/tilt on the full image you also zoom into the region of
interest automatically.
To zoom in on a region of interest:
1.
2.
To store the current view:
1.
2.
3.
To display a pre-set region of interest, click one of the buttons numbered one to six.
Digital I/O
The alarm icons Input 1 to Input 4 are for information purposes and indicate the status of an
alarm input: When an alarm is triggered, the corresponding icon lights up blue. The unit's
configuration determines whether the alarm is displayed, as well as additional details.
Further topics:
–
Triggering relay
You can switch a connected unit by means of the relay in the VideoJet XF E (for example a
light or a door opener).

System Log / Event Log
Bosch Sicherheitssysteme GmbH
Click and hold the arrows to move up and down, and from side to side through the
image.
Click and hold the center area to move in all directions.
Click and hold to zoom in; click and hold
Click to see the full image.
Select a region of interest.
Click Set.
Click a number.
Section 5.15 Advanced Mode: LIVEPAGE Functions, page 38
To activate this, click the icon for the relay next to the video image. The icon will be red
when the relay is activated.
Installation and Operating Manual
Operation | en
to zoom out.
DOC | V5.51 | 2012.03
95