Connecting The Power Supply; Power On/Power Off - Bosch VJD-7000 Installation Manual

16 en | Connection
Contact
Tip
Middle ring
Lower ring
1.
2.
5.5

Connecting the power supply

Power is supplied via a separate power supply unit that is part of the delivery. It offers two
power cords, one for EU and one for US.
Notice!
Use only the power supply unit that is included, together with the suitable power cord.
Connect the unit to an earthed mains socket-outlet.
Do not connect the decoder to the power supply until all other connections have been made.
1.
2.
The unit is now ready for use.
5.6

Power on/power off

VIDEOJET decoder 7000 is equipped with a power switch on its front panel.
1.
2.
3.
All information regarding the functions and the operation can be found in the relevant
documentation of Monitor Wall, Bosch Video Management System, or Video Client.
2013.07 | V1 | DOC
Function
Line Out
Line In
Ground
Connect an audio source with line level to the Line In socket (blue ring) with a 3.5 mm
(1/8 in) stereo plug.
Connect a pair of speakers to the Line Out socket (green ring) with a 3.5 mm (1/8 in)
stereo plug.
Connect the decoder to the power supply unit.
Select the suitable power cord and plug this into the power supply unit and then into the
mains.
Press the power switch on the front once to switch on the unit. The blue light inside the
switch lights up.
To switch off press the power switch again. The blue light turns off.
Switch on the monitor in order to see the user interface after the boot-up procedure.
Installation Manual
VIDEOJET decoder 7000
Bosch Sicherheitssysteme GmbH