Basic Mode: Date/Time - Bosch VJT-X20XF-E Installation And Operating Manual

28 en | Configuration using a Web browser
Password
A VideoJet XF E is generally protected by a password to prevent unauthorized access to the
unit. You can use different authorization levels to limit access.
The VideoJet XF E operates with three authorization levels: service, user and live.
The highest authorization level is service. After entering the correct password, you can access
all the functions of the VideoJet XF E and change all configuration settings.
With the user authorization level, you can operate the unit, play back recordings and also
control cameras, for example, but you cannot change the configuration.
The lowest authorization level is live. It can only be used to view the live video image and
switch between the different live image displays.
Proper password protection is only guaranteed when all higher authorization levels are also
protected with a password. Therefore, you always have to start from the highest authorization
level when assigning passwords.
You can define and change a password for each authorization level if you are logged in as
service or if the unit is not password protected.
Enter the password for the appropriate authorization level here. The maximum password text
length is 19 characters.
CAUTION!
Do not use any special characters, for example &, in the password.
Special characters are not supported by the system's internal management.
Confirm password
In each case, enter the new password a second time to eliminate typing mistakes.
5.4

Basic Mode: Date/Time

Device date / Device time / Device time zone
If there are multiple devices operating in your system or network, it is important to
synchronize their internal clocks. For example, it is only possible to identify and correctly
evaluate simultaneous recordings when all units are operating on the same time. If necessary,
you can synchronize the unit with your computer's system settings.

Time server IP address
The VideoJet XF E can receive the time signal from a time server using various time server
protocols, and then use it to set the internal clock. The unit polls the time signal automatically
once every minute.

DOC | V5.51 | 2012.03
Click the Sync to PC button to copy your computer's system time to the VideoJet XF E.
Enter the IP address of a time server here.
Installation and Operating Manual
VideoJet XF E
Bosch Sicherheitssysteme GmbH