Bosch VJT-X20XF-E Installation And Operating Manual page 33

VideoJet XF E
Device name
You can give the VideoJet XF E a name to make it easier to identify. The name makes the task
of administering multiple units in larger video monitoring systems easier, for example using
the Bosch Video Client or Bosch Video Management System programs.
The device name is used for the remote identification of a unit, in the event of an alarm for
example. For this reason, enter a name that makes it as easy as possible to quickly identify the
location.
CAUTION!
Do not use any special characters, for example &, in the name.
Special characters are not supported by the system's internal management.
Device ID
Each VideoJet XF E should be assigned a unique identifier that you can enter here as an
additional means of identification.
Camera 1 to Camera 4
The camera name makes it easier to identify the remote camera location, in the event of an
alarm for example. It will be displayed in the video screen if configured to do so. The camera
name makes the task of administering cameras in larger video monitoring systems easier, for
example using the Bosch Video Client or Bosch Video Management System programs.
Enter unique, unambiguous names for each camera in these fields. You can use both lines for
this.
CAUTION!
Do not use any special characters, for example &, in the name.
Special characters are not supported by the system's internal management.
You can use the second line for entering additional characters; these can be selected from a
table.
1.
2.
3.
4.
5.
Further topics:
–
Initiator extension
You can attach your own text to the initiator name of the VideoJet XF E to make the unit easier
to identify in large iSCSI systems. This text is added to the initiator name, separated from it by
a full stop. You can see the initiator name in the system overview.
Further topics:
–
Bosch Sicherheitssysteme GmbH
Click the icon next to the second line. A new window with the character map is opened.
Click the required character. The character is inserted into the Result field.
In the character map, click the << and >> icons to move between the different pages of
the table, or select a page from the list field.
Click the < icon to the right of the Result field to delete the last character, or click the X
icon to delete all characters.
Now click the OK button to apply the selected characters to the second line of the
Camera 1 parameters. The window will close.
Section Camera name stamping, page 36
Section 5.49 Advanced Mode: System Overview, page 90
Installation and Operating Manual
Configuration using a Web browser | en
DOC | V5.51 | 2012.03
33