Connections, Controls And Displays - Bosch VJT-X20XF-E Installation And Operating Manual

VideoJet XF E
3.4

Connections, controls and displays

VideoJet X20 XF E
1
4
1
2
3
4
5
6
7
8
9
10
11
Further topics:
–
–
Bosch Sicherheitssysteme GmbH
VIDEO IN 1 VIDEO IN 2
CF CARD
ETH
LINK CONNECT
5 6 7
VIDEO IN 1 and VIDEO IN 2 video inputs
BNC socket for connecting the video source
AUDIO IN audio connection (mono)
3.5 mm / 1/8 in stereo socket line-in for connecting two audio sources
AUDIO OUT audio connection (mono)
3.5 mm / 1/8 in stereo socket line-out for connecting one audio connection
ETH RJ45 socket
for connecting to an Ethernet LAN (local network), 10/100 MBit Base-T
CF CARD slot
for one standard Type I/II CompactFlash memory card
LINK LED
lights up when the unit is connected to the network
CONNECT LED
lights up when supplied with power and during data transmission
Factory reset button
to restore factory default settings
REC LED
flashes during recordings
Terminal block
for alarm inputs, relay output and serial interface
12V DC power connector
for connecting the power supply unit
Section 8.4 LEDs, page 108
Section 8.8 Terminal block, page 109
Installation and Operating Manual
2
AUDIO IN AUDIO OUT
IN1 IN3 GND R CTS RXD GND
IN2 IN4 GND R RTS TXD GND 12V DC
REC
8 9 10
Product description | en
3
11
DOC | V5.51 | 2012.03
13