Basic Mode: Audio; Basic Mode: Recording - Bosch VJT-X20XF-E Installation And Operating Manual

VideoJet XF E
–
–
5.7

Basic Mode: Audio

You can set the gain of the audio signals to suit your specific requirements. Your changes are
effective immediately.
If you connect via Web browser, you must activate the audio transmission on the LIVEPAGE
Functions page. For other connections, the transmission depends on the audio settings of the
respective system.
Further topics:
–
Audio
The audio signals are sent in a separate data stream parallel to the video data, and so increase
the network load. The audio data are encoded according to the selected format and require
additional bandwidth. If you do not want any audio data to be transmitted, select Off.
Line In 1 / Line In 2
You can set the gain for the line inputs. Make sure that the display does not go beyond the
green zone during modulation.
Line Out
You can set the line output gain.
5.8

Basic Mode: Recording

You can record the images from the camera connected to the VideoJet XF E on the local
CompactFlash card. CompactFlash cards are the ideal solution for shorter storage times. Here
you can start or stop the recording.
Bosch Sicherheitssysteme GmbH
MODEM
For analog modem connections with 20 kbps, resolution 352 × 288/240 pixels
GSM
For GSM connections at 9,600 baud, resolution 352 × 288/240 pixels
Section 5.15 Advanced Mode: LIVEPAGE Functions, page 38
Installation and Operating Manual
Configuration using a Web browser | en
DOC | V5.51 | 2012.03
31