Advanced Mode: Privacy Masks - Bosch VJT-X20XF-E Installation And Operating Manual

42 en | Configuration using a Web browser
5.19

Advanced Mode: Privacy Masks

You can cover up to eight different rectangular areas in the video image of each camera, so
that private areas are protected in the camera's field of view. This can be useful when public
spaces are in the coverage area or monitoring will be limited to a particular zone. The areas
covered are indicated by a gray pattern in the video image.
1.
2.
3.
4.
5.
6.
7.
8.
DOC | V5.51 | 2012.03
Click a tab to select the corresponding camera.
In the list field Pattern, select option Gray to activate the function.
Click a checkbox in the Active masks area to activate the corresponding zone. A check
mark appears and the zone is shown in the preview as a rectangular mark.
To reposition a zone, place the cursor over the zone, hold down the mouse button and
drag into position.
To amend the shape of a zone, place the cursor over the edge of the zone, hold down the
mouse button and drag the edge of the zone to the required position.
Set other zones in the same way.
In the Active masks area, click one of checked boxes to deactivate the corresponding
zone. The check mark is hidden and the zone is only displayed as a faint mark in the
preview.
Click the zone with the right mouse button and then click Remove to delete the zone.
Installation and Operating Manual
VideoJet XF E
Bosch Sicherheitssysteme GmbH